Advertisement
4. Lift the NFX250 and position it in the rack. Line up the bottom hole in each mounting bracket with a hole in each rack
rail, making sure the NFX250 is level.
5. While you're holding the NFX250 in place, have a second person insert and tighten the rack mount screws to secure
the mounting brackets to the rack rails. Make sure they tighten the screws in the two bottom holes first and then
tighten the screws in the two top holes.
6. Check that the mounting brackets on each side of the rack are level.
Power On
1. Attach a grounding cable to earth ground and then attach it to the NFX250's grounding points.
2. Turn off the power switch on the NFX250 rear panel.
3. On the rear panel, insert the L-shaped ends of the power cord retainer clip into the holes in the bracket on the power
socket. The power cord retainer clip extends out of the chassis by 3 inches.
4. Insert the power cord coupler firmly into the power socket.
5. Push the power cord into the slot in the adjustment nut of the power cord retainer clip. Turn the nut until it is tight
against the base of the coupler and the slot in the nut is turned 90° from the top of the device.
4
Advertisement
