Roller Bead Loosening (Tc33M Model Only) - Hunter TC33 Series Operation Instructions Manual

2.3 Roller Bead Loosening (TC33M model only)

TC33 Series Tire Changer Operation Instructions
Use the push button controls (1) to position the lower roller to within 1/8" of rim.
Rotate wheel.
Apply lubrication while rotating wheel and pushing the lower bead off the rim with the
lower bead roller (2). Stop when bead is removed from bead seat.
Remove lower roller (2).
Rotate wheel.
Apply lubrication while rotating wheel and pushing the upper bead off the rim with the
upper bead roller (3). Stop when bead is removed from bead seat.
CAUTION: Never place hands near the rollers while applying force and
rotating tire. Hands could be pulled between the roller and
tire causing injury.
Remove upper roller (3).
1. Push button controls
2. Lower roller
3. Upper roller
Basic Procedures• • • • 19