Hunter TC33 Series Operation Instructions Manual page 29

TC33 Series Tire Changer Operation Instructions
Repeat procedure on upper bead of tire. Slip the bead completely into the drop center of the
rim, during mounting of the upper bead.
Position the roller (A) of the Bead press arm on the tire sidewall at 2 o
press the bead into the drop centre using the control unit (B).
Rotate clockwise to mount the tire.
NOTE: If the tire bead does not have sufficient lubrication and the
tire fails to slip into drop center during mounting, the
mount/demount head may fail before damage to tire bead
takes place.
'
clock position and
A
Basic Procedures• • • • 23