Bead Loosening - Hunter TCA34R Series Operation Instructions Manual

2.2 Bead Loosening

TCA34R Series Changer Operation Instructions
The clamping shaft is equipped with a quick clamp cone to speed clamping. Simply
activate the Quick Clamp, drop the cone into place then hand tighten.
Use the push button controls to position the lower roller to within 1/8" of rim.
Rotate wheel.
Apply lubrication while rotating wheel and pushing the lower bead off the rim with the
lower bead roller. Stop when bead is removed from bead seat.
Remove lower roller.
Use the push button controls to position the upper roller to within 1/8" of rim.
Rotate wheel.
Apply lubrication while rotating wheel and pushing the upper bead off the rim with the
bead roller. Stop when bead is removed from bead seat.
CAUTION: Never place hands near the rollers while applying force and
rotating tire. Hands could be pulled between the roller and
tire causing injury.
Basic Procedures • • • • 17