Turning The Power On And Off - Toshiba e-studio1058 Start Manual

Digital multifunctional system
Table of Contents

Advertisement

TURNING THE POWER ON AND OFF

This machine has a main power switch, found at the bottom left after the front cover is opened, and a power button,
located on the operation panel.
[POWER] button
Turning on the power
Turn the main power switch to the "
After the main power indicator lights up green, press the [POWER] button.
Turning off the power
Turn off the power by pressing the [POWER] button, then turn the main power switch to the "
Restarting the machine
In order for some settings to take effect, the machine must be restarted. Follow the message displayed on the touch
panel to restart the system (turn off the power by pressing the [POWER] button and then press it again to turn the power
back on).
• When turning off the main power switch, make sure that all indicators other than the main power are turned off.
• In the case of a sudden main power outage, turn the power for the machine back on and then turn it off in the correct order.
If you turn off the main power switch or unplug the power cord while the indicator is lit up or blinking, the hard disk drive
may be damaged or data may be lost.
• Turn off both the [POWER] button and the main power switch and unplug the power cord if you suspect a machine failure,
if there is a bad thunderstorm nearby, or before you move the machine.
• When you change a toner cartridge while the keyboard is installed, be sure to store it in the operation panel unit. If a toner
cartridge is changed while the keyboard is pulled out, the cartridge may come in contact with the keyboard and cause
damage.
In some machine operating states, restarting using the [POWER] button may not make the settings take effect. In this case,
turn off the main power switch and then turn it on again.
14
Main power indicator
Main power switch
" position.
" position.

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio1208

Table of Contents