Table of Contents
Advertisement
PART NAMES
(1) Finisher (100-sheet stapling)*
This staples and outputs paper.
(2) Status indicator*
The status of the machine is indicated.
(3) Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned at
one time.
(4) Operation panel
This panel hosts the [POWER] button, [Power Save]
button/indicator, [Home Screen] button/indicator, main
power button, USB port (A type) and touch panel. Use the
touch panel to operate each of these functions.
(5) Front cover
Open this to remove a paper misfeed from or to switch the
main power switch on and off.
(6) Keyboard
Use this as a substitute for the soft keyboard displayed on
the touch panel.
(7) Toner tray
This tray contains toner cartridge. When the toner in a
cartridge runs out, the cartridge that ran out must be
replaced.
(8) Bypass tray*
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" × 11"R or A4R, pull
out the extension guide.
(9) Trimming module*
This trims the excess of saddle-stitched output.
(1)
(9)
(10) (11) (12)(13) (14) (15) (16)
(10)Punch module*
This punches and outputs paper.
(11)Curl correction unit*
This corrects curls in printed paper.
(12)Tray 1
Store paper in this tray. Up to 1200 sheets can be stored.
(13)Tray 3
Store paper in this tray. Up to 500 sheets can be stored.
(14)Tray 4
Store paper in this tray. Up to 500 sheets can be stored.
(15)Tray 2
Store paper in this tray. Up to 800 sheets can be stored.
(16)Tray 5 (MX-LC12)*
Store paper in this tray. Up to 3500 sheets can be stored.
(2)
(3)
(4)
(5)
(6)
(7)
(8)
* Options
13
Advertisement
Table of Contents
