TransPocket 180
controls, con-
nections and
mechanical com-
ponents
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Use of the current connections during manual metal arc welding (depending on
electrode type):
-
-
Use of the current connections during TIG welding:
-
-
24
(1)
(2)
(3)
(4)
Control panel
(-) current socket
with bayonet latch
TMC connection (TIG Multi Connector)
After connecting a remote control to the power source
-
'rc' appears on the power source display
-
the welding current can only be adjusted using the remote control
(+) current socket
with bayonet latch
Carrying strap
Cable strap
for holding the mains cable and the welding power-leads
Do not use to move the device!
Mains switch
Air filter
Shielding gas connection
(+) current socket for electrode holder or grounding cable
(-) current socket for electrode holder or grounding cable
(+) current socket for grounding cable
(-) current socket for welding torch
(5)
(6)
(7)
(8)
(9)