Usb Configuration - DFI ADS310-R680E Series User Manual

Advanced
X

USB Configuration

Aptio Setup - AMI
Advanced
USB Configuration
XHCI Hand-off [Enabled]
USB Mass Storage Driver Support [Enabled]
USB hardware delays and time-outs:
USB transfer time-out [20 sec]
Device reset time-out [20 sec]
Device power-up delay [Auto]
Version 2.22.1284. Copyright (C) 2022 AMI
XHCI Hand-off
Enable or disable XHCI Hand-off.
USB Mass Storage Driver Support
Enable or disable USB Mass Storage Driver Support.
USB transfer time-out
The time-out value for Control, Bulk, and Interrupt transfers: 1,5,10,20 secs.
Device reset time-out
USB mass storage device Start Unit command time-out: 10,20,30, 40 secs.
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host Controller.
'Auto' uses default value: for a Root port it is 100 ms, for a Hub port the delat is taken from Hub
descriptor.
User's Manual | ADS310-R680E/Q670E
Enables Legacy USB sup-
port. AUTO option disables
legacy support if no USB
d e v i c e s a r e c o n n e c t e d .
DISABLE option will keep
USB devices available only
for EFI applications.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Chapter 3 Chapter 3 Chapter 3
BIOS SETTINGS BIOS SETTINGS BIOS SETTINGS
46 46 46