Chipset
X
Aptio Setup - AMI
Advanced
PCH-IO Configuration
► PCI Express Configuration
► SATA Configuration
► HD Audio Configuration
Version 2.22.1284. Copyright (C) 2022 AMI
PCI Express Configuration
►
•
LAN1/LAN2/M.2-E/10G_LAN1/10G_LAN2/PCIE3/PCIE4/PCIE5
Enable or disable the PCI Express Root Port. The following fields are only available when
the PCIe root port is enabled.
•
PCIe Speed
Select PCIe Speed of the current port — AUTO, Gen1, Gen 2, or Gen3. This field
may not appear when the speed of the port is not configurable.
•
Hot Plug
Enable or disable hot plug function of the port. This field may not appear when the
port does not support hot plug.
•
Detect Non-Compliance Device
Enable or disable this field to detect non-compliance PCIe devices in the PEG.
This field may not appear when the port does not support Non-compliant device
detection.
SATA Configuration
►
See next page.
HD Audio Configuration
►
Enable or disable HD Audio.
User's Manual | ADS310-R680E/Q670E
Chipset
X
SATA Configuration
PCH-IO Configuration
SATA And RST Configuration
SATA Controller(s)
SATA Speed
M.2-M2(R0)
Port 0
Hot Plug
SATA0 (R4)
Port 4
Hot Plug
SATA1 (R5)
Port 5
→←: Select Screen
Hot Plug
↑↓: Select Item
SATA2 (R6)
Enter: Select
Port 6
+/- : Change Opt.
Hot Plug
F1: General Help
SATA3 (R7)
F2: Previous Values
Port 7
F9: Optimized Defaults
Hot Plug
F10: Save & Exit
ESC: Exit
SATA Controller(s)
This field is used to enable or disable the Serial ATA controller.
SATA Speed
This field is used to select SATA speed generation limit: Auto, Gen1, Gen2 or Gen3.
Ports and Hot Plug
Enable or disable the Serial ATA port and its hot plug function.
PCH-IO Configuration
X
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
[Enabled]
[Auto]
Empty
[Enabled]
[Disabled]
Empty
[Enabled]
[Disabled]
Empty
[Enabled]
[Disabled]
Empty
[Enabled]
[Disabled]
Empty
[Enabled]
[Disabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Chapter 3
BIOS SETTINGS
E n a b l e o r d i s a b l e S ATA
Device.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
52