Usb Configuration; Pci Express Configuration - DFI PIC-Q170/H110 User Manual

PIC-Q170/H110
► Advanced

USB Configuration

InsydeH2O Setup Utility
Advanced
USB Configuration
Legacy USB Support <Enabled>
XHCI Hand-off <Disabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
Legacy USB Support
Enabled Enable Legacy USB support.
Disabled Keep USB devices available only for EFI applications.
UEFI Only Only support UEFI devices.
XHCI Hand-off
Enable or disable XHCI Hand-off.
Chapter 3 - BIOS Settings
Rev. 5.0
U S B k e y b o a r d / m o u s e / s t o r a g e
support under UEFI and DOS
environment. It will support UEFI
environment only if set to UEFI
Only.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

► Advanced

PCI Express Configuration

Advanced
PCI Express Configuration
►PCIE8
►Intel i219 LAN
►ASM1085 PCIe-PCI Bridge
►ASM1182 PCIe Switch
IT8892 PCIe-PCI Controller
►PCIE1
►Intel i211AT LAN
►M.2
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
Select one of the PCI Express channels and press enter to configure the following settings.
PCI Express Root Port
Enable or disable the PCI Express Root Port.
PCIe Speed
Select PCIe Speed of the current port — AUTO, Gen1, Gen2, or Gen3. This field may not ap-
pear when the speed of the port is not configurable.
Hot Plug
Enable or disable hot plug function of the port. This field may not appear when the port does
not support hot plug.
32
www.dfi.com
InsydeH2O Setup Utility
PEG PCI Express Port setting
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Rev. 5.0