Maintenance And Care; Manufacturer's Warranty - STEINEL professional Series Manual

Hallway test mode, movement:
LED permanently lights up green
Hallway movement test mode no
movement:
LED permanently lights up red
True Presence ® calibration process:
LED permanently lights up white

7. Maintenance and care

The product requires no maintenance.
The sensor can be cleaned with a damp
cloth (without detergents) if dirty.
8. Disposal
Electrical and electronic equipment, acces-
sories and packaging must be recycled in
an environmentally compatible manner.
Do not dispose of electrical
and electronic equipment as
domestic waste!
EU countries only
Under the current European Directive on
Waste Electrical and Electronic Equip-
ment and its implementation in national
law, electrical and electronic equipment
no longer suitable for use must be
collected separately and recycled in an
environmentally compatible manner.
9. Conformity
STEINEL GmbH hereby declares that the
True Presence ® COM1 / COM2 /
BT IPD and Hallway COM1 / COM2 / BT
IPD ´radio equipment type conforms to
Directive 2014/53/EU. The full wording
of the EU Declaration of Conformity is
available for downloading from the fol-
lowing Internet address: www.steinel.de

10. Manufacturer's Warranty

Manufacturer's warranty of STEINEL
GmbH, Diesel strasse 80-84, DE-33442
Herzebrock-Clarholz, Germany
All STEINEL products meet the highest
quality standards. For this reason, we,
the manufacturer, are pleased to provide
you, the customer, with a warranty under
the following terms and conditions:
The warranty covers the absence of
deficiencies which are proven to be
the result of a material defect or fault in
manufacturing and which are reported to
us immediately after detection and within
the warranty period. The warranty shall
cover all STEINEL Professional products
sold and used in Germany.
Our warranty cover for consumers
The provisions below apply to consum-
ers. A consumer is any natural person
who, on entering into the purchase
transaction, neither acts in exercising
their commercial nor their self-employed
activity.
You can opt for warranty cover in the
form of repair or replacement which will
be provided free of charge (if applicable,
in the form of a successor model of the
same or higher quality) or in the form of
a credit note.
In the case of sensors, floodlights,
outdoor and indoor lights, the warranty
period for the STEINEL Professional
product you have purchased is 5 years
in each case from the date on which the
product was purchased.
We shall bear the shipping costs but
not the transport risks involved in return
shipment.
Our warranty cover for entrepreneurs
The provisions below apply to entrepre-
neurs. Entrepreneur is a natural or legal
- 24 -