Maintenance And Care; Troubleshooting - STEINEL IR Quattro HD-2 DALI-2 Manual

The IR Quattro HD-2 DALI2 IPD is intend-
ed for connection to a DALI2 Application
Controller (APC). The Bluetooth function-
ality is only intended for configuration via
the Steinel Connect App. In addition to
the DALI interface, this provides another
option for setting up the input device.
Steinel Connect app
To read off the sensor values via smart-
phone or tablet, you must download the
STEINEL Connect app from your app
store. You will need a Bluetooth-capable
smartphone or tablet.
Android
LED function
Start up:
LED flashes blue rapidly for 10 seconds.
Initialisation:
LED permanently lights up blue.
Normal mode: LED OFF.
Identification
LED flashes blue slowly.
Firmware update:
LED flashes cyan rapidly.
No application available
LED permanently lights up cyan.
Test mode, movement:
LED flashes green.
Error: The LED flashes red rapidly.
iOS
Setting detection
The detection zone can also be set via
the potentiometer (E) on the back of the
sensor module in accordance with the
table. (Fig. 3.7/6.1)
The sensitivity of the four pyros (A to D)
can be set via the DALI bus.
Letters A to D are shown underneath the
sensor housing. The letters designate
the direction of detection the sensitivity
setting relates to.
You will find detailed information in
the interface description on the
Internet at: www.steinel.de

7. Maintenance and care

Hazard from electrical power.
Contact between water and live parts can
result in electrical shock, burns or death.
• Only clean tool in a dry state.
Risk of damage to property!
Using the wrong detergent can damage
the light.
• Clean unit with a moist cloth without
detergent.

8. Troubleshooting

Light does not switch ON.
– No supply voltage.
• Check supply voltage
– No presence detection.
• Ensure unobstructed sensor vision.
• Check detection zone.
Lights do not switch OFF.
– Objects moving in the detection zone.
• Check detection zone.
- 15 -
GB