About This Document; General Safety Precautions - STEINEL professional Series Manual

Hide thumbs Also See for professional Series:
Table of Contents

Advertisement

Available languages

Available languages

GB

1. About this document

– Please read carefully and keep in a
safe place.
– Under copyright.
Reproduction either in whole or in part
only with our consent.
– Subject to change in the interest of
technical progress.
Symbols
!
Hazard warning!
Reference to other information
...
in the document.

2. General safety precautions

Disconnect the power supply
!
before attempting any work
on the sensor!
• During installation, the electric power
cable being connected must not be
live. Therefore, switch off the power
first and use a voltage tester to make
sure the wiring is off-circuit.
• Installing the sensor involves work
on the mains power supply. This
work must therefore be carried out
professionally in accordance with
national wiring regulations and electri-
cal operating conditions.
• Only use genuine replacement parts.
• Repairs may only be made by spe-
cialist workshops.
• Terminal B1 / B0 is a switching con-
tact for low-energy circuits, no more
than 1 A. This must be protected by a
fuse of the appropriate rating.
3. True Presence
COM1 / COM2 / BT IPD
Hallway
COM1 / COM2 / BT IPD
Proper use
– Sensor for ceiling mounting indoors.
Sensor-switched types
– True Presence
– Hallway
The True Presence
frequency sensor. It reliably identifies
human presence and absence by
detecting micro-movements. The
detection zone can be defined with
absolute precision via app.
This makes it ideal for use in offices and
schools
For specific applications, such
as cruise ships or hotels, please
contact us directly so we can work
together on defining the best way
to integrate the sensors.
The Hallway Sensor is a high-frequency
sensor with a perfect detection zone for
corridors. The detection zone can be
adjusted in both directions via app.
Interface types
COM1:
relay 1
COM2:
relay 1 and relay 2
(for HVAC: heating / ventilation /
air-conditioning)
BT IPD:
no relay / no control
The COM1 and COM2 versions
switch loads ON and OFF. Signals are
processed and sent out.
- 19 -
®
®
®
sensor is a high-
GB

Advertisement

Table of Contents
loading

Table of Contents