Removing The M.2 Ssd Module - Dell PowerEdge C6615 Installation And Service Manual

Figure 46. Installing the M.2 riser
Next steps
1. Replace the air shroud.
2. Follow the procedure listed in

Removing the M.2 SSD module

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. Remove the M.2 Riser.
Steps
1. Using a Phillips 1 screwdriver, remove the screw securing the M.2 SSD module to the M.2 riser.
2. Pull the M.2 SSD module to disconnect from the connector on the M.2 riser.
After working inside your
Safety instructions.
Before working inside your
system.
system.
Installing and removing system components 73