Table of Contents
Advertisement
Table 26. Processor Settings details (continued)
Option
x2APIC Mode
Number of CCDs per Processor
Number of Cores per CCD
Processor Core Speed
Processor n
Table 27. Processor n details
Option
Family-Model-Stepping
Brand
Level 2 Cache
Level 3 Cache
Number of Cores
Microcode
SATA Settings
To view the SATA Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS >
SATA Settings.
Table 28. SATA Settings details
Option
Embedded SATA
Security Freeze Lock
Write Cache
Description
Enables or disables x2APIC mode. This option is set to
Enabled by default.
Controls the number of enabled CCDs in each processor. This
option is set to All by default.
Specifies the number of cores per CCD. This option is set to
All by default.
Specifies the maximum core frequency of the processor.
The following settings are displayed for each processor that is
installed in the
system:
Description
Specifies the family, model, and stepping of the processor as
defined by AMD.
Specifies the brand name.
Specifies the total L2 cache.
Specifies the total L3 cache.
Specifies the number of cores per processor.
Specifies the processor microcode version.
Description
Enables the embedded SATA option to be set to Off, AHCI mode , or RAID modes.
This option is set to AHCI Mode by default.
NOTE:
1. You might also need to change the Boot Mode setting to UEFI. Otherwise, you
should set the field to Non-RAID mode.
2. No ESXi and Ubuntu OS support under RAID mode.
Sends Security Freeze Lock command to the embedded SATA drives during POST.
This option is applicable only for AHCI Mode. This option is set to Enabled by default.
Enables or disables the command for the embedded SATA drives during POST. This
option is set to Disabled by default.
NOTE:
For two CPU 64 cores configuration, x2APIC
mode is not switchable if 256 threads are enabled (BIOS
settings: All CCD, cores, and logical processors enabled).
NOTE:
Depending on the number of CPUs, there might be
up to n processors listed.
Pre-operating system management applications
31
Advertisement
Table of Contents
