Installing An Ocp Card - Dell PowerEdge C6615 Installation And Service Manual

Figure 64. Removing an OCP card
Next steps
1. Install the OCP card filler.

Installing an OCP card

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. Remove the OCP card
4. Remove the expansion card riser 1
5. Remove the expansion card riser 2
Steps
1. Align and insert the OCP card into the sled. Slide the OCP card and push firmly until it is fully connected to the system board
connector.
NOTE: Ensure to lift the OCP card retention latch if it is in the lock position.
2. Close the OCP card retention latch to secure the card in place.
90 Installing and removing system components
Safety instructions.
Before working inside your
filler.
system.