Table of Contents
Advertisement
Network Settings
To view the Network Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Network Settings.
NOTE:
For information about Linux network performance settings, see the Linux Network Tuning Guide for AMD EPYC
Processor Based Servers at AMD.com.
NOTE:
Network Settings are not supported in BIOS boot mode.
Table 32. Network Settings details
Option
UEFI PXE Settings
Number of PXE Devices
PXE Device n (n = 1 to 16)
PXE Device n Settings(n = 1 to 16)
UEFI HTTP Settings
HTTP Device n (n = 1 to 4)
HTTP Device n Settings (n = 1 to 4)
UEFI ISCSI Settings
UEFI NVMe-oF Settings
Table 33. PXE Device n Settings details
Option
Interface
Protocol
VLAN
VLAN ID
VLAN Priority
Table 34. UEFI ISCSI Settings screen details
Option
ISCSI Initiator Name
ISCSI Device1
ISCSI Device1 Settings
Table 35. ISCSI Device1 Settings screen details
Option
Connection 1
Connection 2
Connection 1 Settings
Connection 2 Settings
34
Pre-operating system management applications
Description
Enables you to control the configuration of the UEFI PXE device.
Enables you to choose the number of PXE Devices from 1 to 4, 8, 12, 16.
Enables or disables the device. When enabled, a UEFI PXE boot option is
created for the device.
Enables you to control the configuration of the PXE device.
Enables you to control the configuration of the UEFI HTTP device.
Enables or disables the device. When enabled, a UEFI HTTP boot option is
created for the device.
Enables you to control the configuration of the HTTP device.
Enables you to control the configuration of the ISCSI device.
Enables you to control the configuration of the NVMe-oF device.
Description
Specifies NIC interface used for the PXE device.
Specifies Protocol used for PXE device. This option is set to IPv4 or IPv6. This option is set to
IPv4 by default.
Enables VLAN for PXE device. This option is set to Enable or Disable. This option is set to
Disable by default.
Shows the VLAN ID for the PXE device
Shows the VLAN Priority for the PXE device.
Description
Specifies the name of the ISCSI initiator in IQN format.
Enables or disables the ISCSI device. When disabled, a UEFI boot option is created for
the ISCSI device automatically. This is set to Disabled by default.
Enables you to control the configuration of the ISCSI device.
Description
Enables or disables the ISCSI connection. This option is set to Disable by default.
Enables or disables the ISCSI connection. This option is set to Disable by default.
Enables you to control the configuration for the ISCSI connection.
Enables you to control the configuration for the ISCSI connection.
Advertisement
Table of Contents
