Table of Contents
Advertisement
NOTE:
Nodes Per Socket (NPS) support varies with memory channel population. For instance, NPS4 requires 4 memory
channels populated.
Table 54. Nodes Per Socket (NPS) supported
Number of DIMMs populated
6
4
2
1
This table shows the memory population information for AMD Family 19h Models A0h-AFh Socket SP6 processors with
support for NPS.
Removing a memory module
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
WARNING:
The memory modules are hot to touch for some time after the system has been powered off. Allow
the memory modules to cool before handling them.
NOTE:
To ensure proper system cooling, memory module blanks must be installed in any memory socket that is not
occupied. The memory module blanks compatible with the C6615 are DDR5 gray color blanks. Remove the memory module
blanks only if you intend to install memory modules in those sockets.
Steps
1. Locate the appropriate memory module socket.
2. To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module
socket to fully open.
CAUTION:
Handle each memory module only by the card edges, ensuring not to touch the middle of the
memory module or metallic contacts.
3. Lift the memory module away from the system.
Safety
instructions.
Before working inside your system
Nodes Per Socket (NPS) supported
NPS2, NPS1
NPS4, NPS2, NPS1
NPS2, NPS1
NPS1
.
Installing and removing system components
77
Advertisement
Table of Contents
