Table of Contents
Advertisement
Figure 56. Placing the carrier frame into the rail frame
2. Holding both of blue tabs to push the rail frame down until the blue latches lock into place.
NOTE:
Ensure that the CPU carrier does not climb up the rail frame rib of the Socket actuation mechanism (SAM).
Figure 57. Closing the rail frame
3. Secure the retention frame by holding down the retention frame with one hand while using the other hand to operate the
screw driver to engage and fasten the Socket actuation mechanism (SAM) screws according to the screw sequence defined
on the SAM. Assembly order: 1, 2 and 3.
Installing and removing system components
83
Advertisement
Table of Contents
