Analog Module / Factory Defaults - Emerson Aventics G3 Series Technical Manual

G3 Series EtherCAT

Analog Module / Factory Defaults

FACTORY
DEFAULTS
SET DEFAULTS
YES N0
Description
Low Alarm Values
High Alarm Values
Brightness
TM
Factory Default Settings
1. Press the SET button to enter the FACTORY DEFAULTS
sub-menu.
Press the NEXT button to select Yes or No.
2.
a.
b.
Press the SET button to confirm your choice.
FACTORY DEFAULT SETTINGS
10 V / 20 mA
TDG3ECM1-5EN 07/2020
Subject to change without notice
www.asco.com/g3
Technical Manual
Selecting No will bring you back to the main
FACTORY DEFAULTS menu.
Selecting Yes will cause the module to reset and
return all parameters to the factory default
conditions.
Default
0 V / 4 mA
Medium
10-103