Ethercat Tm Communication - Emerson Aventics G3 Series Technical Manual

G3 Series EtherCAT
EtherCAT TM communication
This will disable EtherCAT
ETHERCAT
ENABLED
ETHERCAT
ENABLED
ETHERCAT
DISABLED
ETHERCAT
RETURN
ACCEPT
ENABLED Y N
ACCEPT
ENABLED Y N
SAVE SETTINGS
NOW LATER
Disabling EtherCAT
•
CAUTION
TM communication to connect to the G3 webserver.
1. Press the SET button to enter the EtherCAT
communication sub-menu.
2. Press the NEXT button to scroll through the choices to
enable or disable the feature.
d.
e.
f.
Press the SET button to confirm your choice.
3. Press the NEXT button to select Yes or No to accept the
selection.
c.
d.
Press the SET button to confirm your choice.
Apply Changes Steps
Press the NEXT button to select either NOW or LATER.
4.
c.
d.
Press the SET button to confirm your choice.
stops all communication with the EtherCAT
TM
TDG3ECM1-5EN
Subject to change without notice
www.asco.com/g3
Technical Manual
TM
EtherCAT TM Steps
ENABLED (Factory Default)
DISABLED
RETURN (this will return you to the main menu)
Selecting No will bring you back to the main
menu.
Selecting Yes will take you to the following apply
changes menu.
Selecting NOW will cause the node to reset and
apply the new setting.
Selecting LATER will cause the new setting to be
saved in memory, you must accept the saved
changes before your next power cycle otherwise
they will be lost.
TM
07/2020
TM
master!
5-37