Table of Contents
Advertisement
G3 Series EtherCAT
Advanced Settings – Brightness
ADVANCED
SETTINGS
ADVANCED
SET BRIGHTNESS
Brightness Settings
5.
1.
6.
2.
7.
BRIGHTNESS.
8.
BRIGHTNESS
3.
HIGH
9.
BRIGHTNESS
4.
LOW
BRIGHTNESS
MEDIUM
BRIGHTNESS
HIGH
TDG3ECM1-5EN
Subject to change without notice
www.asco.com/g3
Technical Manual
TM
Brightness Settings
Press the SET button to enter the ADVANCED SETTINGS
Press the SET button to enter the ADVANCED SETTINGS
menu.
menu.
Press the NEXT button to scroll to the option
Press the NEXT button to scroll to the CONFIG MENU / SET
"SET BRIGHTNESS"
BRIGHTNESS.
Press the SET button to enter the CONFIG MENU / SET
The current state of the parameter is shown
The current state of the parameter is shown
Press the SET button to change this parameter
Press the SET button to change this parameter
Press the NEXT button to scroll the choices for the desired
Press the NEXT button to scroll the choices for the desired
brightness of the graphic display for all modules on the G3
brightness of the graphic display for all modules on the G3
system.
system.
d.
LOW
a.
LOW
e.
MEDIUM
b.
MEDIUM
f.
HIGH (Factory Default)
c.
HIGH (Factory Default)
Press the SET button to confirm your choice. The changes
Press the SET button to confirm your choice. The changes
will take effect immediately.
will take effect immediately.
07/2020
5-42
Advertisement
Table of Contents
