Sub-Bus Distribution Modules - Emerson Aventics G3 Series Technical Manual

Sub-Bus Distribution Modules

SUB-BUS OUT Module
1. Used only when distributing the Sub-Bus to another assembly is required.
2. SUB-BUS OUT - 5 pin M12 female communication connector.
Used to distribute the Sub-Bus to the next Sub-Bus assembly.
o
Carries 24 VDC power for electronics of the next module.
o
3. AUX. POWER OUT - 4 pin M12 female aux. power connector.
Optional connection.
o
Used as a convenience way to distribute the power connection to the next
o
Sub-Bus assembly.
Sub-Bus OUT Module with Din Rail Mounting
Sub-Bus OUT module without Din Rail Mounting
G3 Series EtherCAT
Description
TDG3ECM1-5EN
Subject to change without notice
www.asco.com/g3
Technical Manual
TM
Replacement Part Number
240-244
240-183
07/2020
7-54