G3 Series EtherCAT
Technical Manual
TM
Node Configuration
The "Node Configuration" window can be used to control different parameters within the manifold. These parameters
include, "Station Alias", "Max Coils", "Node Configuration Parameters (lock)" and "I/O Configuration (lock)".
Once the changes have been made, left click on the "Update Configuration" button. The "Configuration Successfully
Updated" window will appear. The EtherCAT
TM
node will reset in a few seconds, or the user may cycle power to enable
the new configuration.
TDG3ECM1-5EN
07/2020
13-137
Subject to change without notice
www.asco.com/g3