Applications; Introduction; List Mode - Delta A1500 Series User Manual

User Manual
A1500
AC Power Source

3.8 Applications

3.8.1 Introduction

A1500 SERIES provides not only stable AC voltage but also three kinds of programmable
dynamic output. Following paragraphs explain the definition of parameters and how to do
the setting:
 LIST mode：Let user to set 10 sets of user-defined voltage, frequency. This mode can
make 10 different outputs consecutively.
 PULSE mode：Simulate repeatedly changed output voltage.
 STEP mode：Simulate gradually changed output voltage.
A1500 SERIES also provide 39 orders of amplitude and phase angle settings for user to
make self-defined waveforms. It can be used at all output modes once the self-defined
waveforms is created.

3.8.2 LIST Mode

1. At advanced parameter setting page, press 3 to select LIST
2. Press
Enter
3. Press
Page up Page down
LIST mode provide 10 sets of programmable waveform（SEQ-0 ~ SEQ-9）. Output
41 │ www.deltaww.com
to enter LIST page
enter next page shown as below