Command For Remote Control; Ieee 488.2 Standard Command - Delta A1500 Series User Manual

User Manual
A1500
AC Power Source

4.3 Command for Remote Control

4.3.1 IEEE 488.2 Standard Command

*ESE <n>
bit
Bit name
Bit
definition
*ESE?
*ESR?
*IDN?
*RCL <n>
*SAV <n>
*SRE <n>
Bit
name
definition
59 │ www.deltaww.com
Set flag mask of standard event status register.
This command is for a register used for IEEE488.2 defined standard events. It
is used for flag mask or control enable. Set by 1 enables target event detection,
and event detection is masked if setting is 0. No response to target events
when 0 is set. Bits configuration for standard events register are:
7 6 5
PON ---- CME
Power Command
on error
Query flag mask for standard event status register.
Query value stored in standard events status register, 1 represents event
occurs.
Return string of AC source identification.
Parameter returns ： DME-ACS1152B X,000,000
 DME-ACS1152B X
 000,000
Recall stored system setting.
parameter：1~3
Save system setting
parameter：1~3
Flag mask setting for service events status register
This command is for a register used for IEE488.2 and instrument defined
service events. It is used for flag mask or control enable. Set by 1 enables
target event detection, and event detection is masked if setting is 0. No
response to target events when 0 is set. Bits configuration for service events
register：
7 6
---- MSS/SRQ
Service
request
4 3
EXE DDE
Execution Error related
error to instrument
： Name of AC source
： Version of firmware
5
ESB
Brief info. For service
event register
2 1
QYE ----
Query
error
4 3
MAV ----
Info. available
0
OPC
Operation
completed
2 1 0
---- ---- ----