Delta A1500 Series User Manual page 51

User Manual
A1500
AC Power Source
Select Go to Trigger Mode, press
"Trigger On" represents that the trigger is ready. "Stop" is the current output state.
Press
Enter
as shown below. When the user stop the STEP wave output or the AC power supply
finishes executing the all times of Count, the screen will display "Stop".
When the output state of AC source is triggered, pressing
Press
OUT
page setting. Then press
output state to the STEP mode output state.
Pressing
mode.
48 │ www.deltaww.com
key to trigger. And then the screen will display "Trigger OFF" and "Running"
button again, the AC source will output the waveform according to the main
Enter
ESC/
key will exit the STEP execution mode and back to the STEP setting
Cancel
to enter Trigger page shown as below：
Enter
key, the output state can be triggered from the main page
key can stop the output.
OUT