Jianshe ZD-FJ08C Operation Manual page 44

Operation Manual
on at the same time and the buzzer will ring for 3 seconds; after the ring of buzzer, the yellow
lamp will go on within 2 seconds, which indicates the machine will start up normally by
clicking Start Button for the second time within the two seconds. If it is made, then the green
lamp will go on while the yellow lamp will go out.
7. Main Motor Inching Button: click Main Motor Inching Button, then the red, green, yellow
lamps on the caution lamp will go on at the same time and the buzzer will ring for 3 seconds;
after the ring of buzzer, the yellow lamp will go on within 2 seconds, which indicates the main
motor will run at the inching speed by pressing and holding this button within the two seconds,
meanwhile the green lamp will go on while the yellow lamp will go out. If this button is
released later, then the main motor will stop, and the red lamp will go on while the green lamp
will go out. This button is mainly used for inching the main motor.
8. Whole Machine Inching Button: click Whole Machine Inching Button, then the red, green,
yellow lamps on the caution lamp will go on at the same time and the buzzer will ring for 3
seconds; after the ring of buzzer, the yellow lamp will go on within 2 seconds, which indicates
the whole machine will run at the inching speed by pressing and holding this button within the
two seconds, meanwhile the green lamp will go on while the yellow lamp will go out. If this
button is released later, then the whole machine will stop, and the red lamp will go on while the
green lamp will go out. This button is mainly used for inching the whole machine.
9. Emergency Stop Button: hit Emergency Stop Button, the machine will scram and at this
moment any buttons will be invalid. When reset the state of emergency stop, it is necessary to
pull out the emergency stop button. The machine can be operated normally only after pressing
the reset button on the touch screen.
—————Jiangsu Fangbang Machinery Co., Ltd.—————
ZD-FJ08C
37