Jianshe ZD-FJ08C Operation Manual page 35

Operation Manual
1. First Clamp
2. Side Clamp
3. Second Clamp
5.4.2.8. Operation of Bottom Gluing Part
Stick rubber board for gluing before bottom gluing; the size and position of rubber board should be
determined by the bag body width and bottom width of paper bag. Shear the rubber board and stick
it with double sided tape onto gluing
rubber board and paper bag bottom can be changed by adjusting the gear at the end of gluing
The bottom gluing can be started after the completion of adjusting the relative positions of glue
dipping , glue transfer
pulley
onto the paper bag bottom should be adjusted by the gaps between different
—————Jiangsu Fangbang Machinery Co., Ltd.—————
Figure 25. Schematic Diagram of Clamps for Bottom Forming
pulley (Figure 26-3)
, gluing
pulley pulley
. The relative position between the stuck
and large hub. The quantity of glue to be applied
ZD-FJ08C
pulley
.
pulleys
.
28