Operation And Description Of Front Panel Buttons - Jianshe ZD-FJ08C Operation Manual

Operation Manual

5.6.2. Operation and Description of Front Panel Buttons

1. Air Source Pressure Gauge: used for indicating the air source pressure of air cylinder on
operating side of the second material traction pressing roller.
2. Air Source Pressure Gauge: used for indicating the air source pressure of air cylinder on
transmission side of the second material traction pressing roller.
3. Air Source Pressure Gauge: used for indicating the air source pressure of air cylinder on
operating side of the first material traction pressing roller.
4. Air Source Pressure Gauge: used for indicating the air source pressure of air cylinder on
transmission side of the first material traction pressing roller.
5. Acceleration Button: accelerate the machine when this button is pressed.
6. Start Button: click Start Button, then the red, green, yellow lamps on the caution lamp will go
on at the same time and the buzzer will ring for 3 seconds; after the ring of buzzer, the yellow
lamp will go on within 2 seconds, which indicates the machine will start up normally by
clicking Start Button for the second time within the two seconds. If it is made, then the green
lamp will go on while the yellow lamp will go out.
7. Main Motor Inching Button: click Main Motor Inching Button, then the red, green, yellow
lamps on the caution lamp will go on at the same time and the buzzer will ring for 3 seconds;
after the ring of buzzer, the yellow lamp will go on within 2 seconds, which indicates the main
motor will run at the inching speed by pressing and holding this button within the two seconds,
meanwhile the green lamp will go on while the yellow lamp will go out. If this button is
released later, then the main motor will stop, and the red lamp will go on while the green lamp
will go out. This button is mainly used for inching the main motor.
8. Whole Machine Inching Button: click Whole Machine Inching Button, then the red, green,
—————Jiangsu Fangbang Machinery Co., Ltd.—————
Figure 32. Schematic Diagram of Front Panel
ZD-FJ08C
34