Operation Of Tube Forming Component - Jianshe ZD-FJ08C Operation Manual

Operation Manual
component (Figure 8-6).
1. Tube Forming Frame
2. Side Tucking Disc Adjusting Seat
3. Mould Fixing Bar
4. Side Tucking Disc Adjusting Wheel
5. Contrast Sensor
6. Paper Pressing Pulley Component
7. Side Tucking Disc Component
8. Forming Mould Component

5.3.2. Operation of Tube Forming Component

Mounting and Unmounting Tube Forming Moulds: to mount the forming moulds, at first you
should select a pair of suitable forming moulds of certain sizes according to the bag width. Then
move side tucking discs and paper pressing pullys outward, and finally install the forming moulds
onto mould frame and lock the fastening screws on the moulds (Figure 9-1). To unmount the
forming moulds, you can finish the work in reverse steps.
—————Jiangsu Fangbang Machinery Co., Ltd.—————
Figure 8. Schematic Diagram of Tube Forming Component
ZD-FJ08C
14