Table of Contents
Advertisement
Shutdown:
The system can be turned off at any time by turning off the power switch without damaging the
system.
Note:
1. Check whether the power supply is loaded before movement;
2. If there is any problem with the machine, please contact the distributor. Non-professionals, do not try
to disassemble or repair the machine so as to avoid damage to the equipment.
Slope Motor Learning:
In the standby state, hold down the external incline plus or minus key for 3 seconds at the same time,
and the system will enter the automatic incline learning. When learning is complete, the system will
exit automatically. If E04 is reported during the learning process, check the motor, motor signal cable,
or replace the driver.
COMPUTER OPERATION |
17
Advertisement
Table of Contents
