Ulvac CR16B Instruction Manual page 51

Shutdown
Do not touch, open the pump cover because the motor, pump or pipe is and
remains very hot while after having stopped operation. You have a risk of
getting burned if a part of the body touched it.
WARNING
Check and repair
(1) Be sure to turn OFF the MCCB (Molded Case Circuit Breaker) primary side
utility before executing check and repair. You have a risk of getting
electrical shock or injury by accidental sudden move.
(2) Person other than Repair technician should not be in charge of
dismantling, repairing or remodeling the product.
(3) You have a risk of getting injured or electrical shock by a fire or erroneous
WARNING
move.
(4) Should you found any malfunction or error, just turn OFF the MCCB
(Molded Case Circuit Breaker) primary side utility to prevent accident and
ask the agency or closest Service Center for check and repair.
Power Supply wiring <Dismantling>
Be sure to cut off the electricity before starting install or dismantling
operation.
WARNING
Inlet piping <Dismantling>
(1) Take off the piping following the Install Manual of the pump.
(2) Inlet piping remains very hot wile after having stopped the Pump. Be sure
to take it off after the Pump has sufficiently cooled down.
WARNING
(3) Make the Pump exhaust outlet airtight completely with a blank flange.
Transfer
(1) Although this pump is provided with casters, do not move it a long
distance using these casters.
(2) Weight of this product is as follows.
You have a risk of giving damage to your back as the load larger than
WARNING
safety standard shall be required to transfer the product. Be sure to use
the loading machinery (such as mobile crane) to lift up the Pump or load it
on the pallet and fix it with Jack and run the Pallet truck for its transfer.
CR 60 : 48 kg
vi
YK16-0010-DI-002-02