Lenovo 7D96 Manual page 24

Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPSE4054I IPMI SEL wrapping mode is [arg1] by user [arg2] at IP address [arg3].
FQXSPSE4055I SED encryption is enabled by user [arg1] at IP address [arg2].
FQXSPSE4056I SED AK is [arg1] by user [arg2] at IP address [arg3].
FQXSPSE4057I User [arg1] created by user [arg2] from [arg3] at IP address [arg4].
FQXSPSE4058I User [arg1] removed by user [arg2] from [arg3] at IP address [arg4].
FQXSPSE4059I User [arg1] password modified by user [arg2] from [arg3] at IP address
[arg4].
FQXSPSE4060I User [arg1] role set to [arg2] by user [arg3] from [arg4] at IP address
[arg5].
FQXSPSE4061I User [arg1] custom privileges set: [arg2][arg3][arg4][arg5][arg6][arg7]
[arg8][arg9] by user [arg10] from [arg11] at IP address [arg12].
FQXSPSE4062I The system guard snapshot is captured by user [arg1] from [arg2] at
IP address [arg3].
FQXSPSE4063I The system guard configuration is updated: status=[arg1], hardware
inventory=[arg2] and action=[arg3] by user [arg4] from [arg5] at IP
address [arg6].
FQXSPSE4064I SNMPv3 engine ID is changed from [arg1] to [arg2] by user [arg3] from
[arg4] at IP address [arg5].
FQXSPSE4065I SFTP [arg1] by user [arg2] from [arg3] at IP address [arg4].
FQXSPSE4066I Cryptographic mode is modified from [arg1] to [arg2] by user [arg3]
from [arg4] at IP address [arg5].
FQXSPSE4067I User [arg1] accessible interfaces is set to [arg2][arg3][arg4][arg5][arg6]
by user [arg7] from [arg8] at IP address [arg9].
FQXSPSR2001I Sensor [SensorElementName] has deasserted the transition to non-
recoverable from a less severe state.
FQXSPSS4000I Management Controller Test Alert Generated by [arg1].
FQXSPSS4001I Server General Settings set by user [arg1]: Name=[arg2], Contact=
[arg3], Location=[arg4], Room=[arg5], RackID=[arg6], Rack U-
position=[arg7], Address=[arg8].
FQXSPSS4002I License key for [arg1] added by user [arg2].
FQXSPSS4003I License key for [arg1] removed by user [arg2].
FQXSPSS4004I Test Call Home Generated by user [arg1].
FQXSPSS4005I Manual Call Home by user [arg1]: [arg2].
FQXSPSS4006I Call Home to [arg1] failed to complete: [arg2].
FQXSPSS4007I The BMC functionality tier is changed from [arg1] to [arg2].
FQXSPSS4008I The [arg1] setting has been changed to [arg2] by user [arg3].
FQXSPSS4009I System enters LXPM maintenance mode.
FQXSPSS4010I Test Audit Log generated by user [arg1].
20
ThinkSystem SR850 V3 Messages and Codes Reference
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational