Lenovo 7D96 Manual page 169

4. If the issue is not resolved then contact Lenovo Support.
• FQXSFMA0040K: Invalid Intel Optane PMEM configuration detected. Please verify PMEM
configuration is valid.
Severity: Warning
User Action:
Complete the following steps:
1. Check system spec and follow the rules for populating PMEM in correct order.
2. If the problem persists, collect Service Data logs.
3. Contact Lenovo Support.
• FQXSFMA0041K: Near Memory/Far Memory ratio (1:[arg1].[arg2]) for Intel Optane PMEM
configuration is not in recommended range (1:[arg3] - 1:[arg4]).
Severity: Warning
User Action:
Complete the following steps:
1. Validate system's memory configuration by using the memory configuration tool below: https://dcsc.
lenovo.com/#/memory_configuration.
2. Resolve DIMM configuration so that the PMEM ratio meets firmware requirements, then reboot the
system.
• FQXSFMA0042K: Intel Optane PMEM is not supported by processor of this system.
Severity: Error
User Action:
Validate system's memory configuration by using the memory configuration tool below: https://dcsc.
lenovo.com/#/memory_configuration.
• FQXSFMA0046I: DIMM [arg1] is Intel Optane PMEM and its volatile or non-volatile capacity will be
inaccessible because that configuration mode is not supported on current platform.
Severity: Info
User Action:
Complete the following steps:
1. Power off the system.
2. Reconfig the Intel Optane PMEM.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFMA0046M: DIMM [arg1] is disabled because it is Intel Optane PMEM that is not supported
on current platform
Severity: Error
User Action:
Complete the following steps:
1. Power off the system.
2. Remove the unsupported Intel Optane PMEM from this system.
3. If the problem persists, collect Service Data logs.
. 165
Chapter 3 UEFI events