Clas Ohlson SBL-2804-UK Instruction Manual page 6

Use
1. Place the candy floss machine on a level surface and plug it into a power point.
2. Switch the machine ON and let it warm up for 5 minutes.
3. Place the power switch in the OFF position, and let the extractor head come to
a complete stop.
4. Use the included measuring scoop to measure a level scoopful of sugar and
pour it into the centre of the extractor head.
Note: Never add more sugar than the amount the measure holds = max 1 tablespoon.
5. Set the switch to the ON position. The extractor head will begin spinning.
6. The candy floss machine will now start producing candy floss. Insert a stick into
the bowl in a completely upright position. Then slowly rotate the stick between
your fingers while simultaneously moving it in a one-way circular direction slightly
above the bowl's rim.
7. Once you have gathered a little floss, continue with the same procedure as
described above, only this time begin angling the stick into the bowl to make it
easier for the floss to build onto it.
8. When finished, set the power switch to the OFF position and unplug the machine.
6