Clas Ohlson SBL-2804-UK Instruction Manual page 3

• To prevent electric shocks, the machine and its mains lead
should be kept dry.
• Never lay the mains lead over hot surfaces, sharp edges or corners.
• Always disconnect the machine from the power supply by
holding and pulling the plug. Do not pull the mains lead.
• Make sure that all parts are correctly assembled and
that the machine is switched off before it is connected to
the power supply.
• Never use the machine close to heat sources.
• Only use the provided accessories.
• Never use the machine for anything other than its intended
use.
• The mains lead should be checked regularly. Never use
the machine if the mains lead or plug is damaged.
• The mains lead must be changed if damaged. This is to
prevent the risk of electric shock or fire and should only be
carried out by the manufacturer, qualified service facility or
qualified technician.
• Do not touch any of the machine's hot surfaces, as burn
injuries may result.
• Never touch any of the product's moving parts while in use.
• Never leave the product unattended during use.
• The appliances are not intended to be operated by means of
an external timer or separate remote-control system.
• The product is subject to overheating if used more than 30
min at a time. Therefore, the product must be allowed to cool
for at least 10 min for every 30 min of use. Use the cooling
off period to clean out the bowl before reuse. Allowing
the machine to overheat may pose a fire hazard.
3