Chapter 3 Configure And Troubleshoot - HP AlphaServer ES80 Upgrade

This chapter covers power-up following the hardware upgrade, and configuration of the newly
installed elements into the system using the firmware. Some troubleshooting is also included.
Examples show sample console displays for a 4P system. Changes for the 6P and 8P systems
are noted in the explanations. Two conventions are used:
1. Sections of console output that are not relevant to verifying this upgrade have been
deleted. They are represented in the example text as:
<< ------------ lines deleted ------------- >>
Relevant sections are highlighted. Your User Information CD has complete power-
up information.
2. Commands that you input are shown in boldface type, and underlined. For example:
show cable
Sections include:
•
Notify server management of new member(s)
•
Set membership takes effect
•
Reset micros
•
Run show cable
•
Connect to partition
•
Troubleshooting during console power-up
•
Troubleshooting power during power-up
Configure and Troubleshoot
Chapter 3
Configure and Troubleshoot 3-1