Connect To Partition; Example 3-5 Run Connect - HP AlphaServer ES80 Upgrade

3.5

Connect to Partition

Next, connect all components to your partition(s).
Example 3–5 Run Connect
MBM>
MBM> conn(ect)
Connecting to partition. Use the sequence ^[^[MBM to return.
starting console on CPU 0
<< ------------ lines deleted ------------- >>
Get Partition DB
hpcount = 1, spcount = 2, ev7_count = 4,
hard_partition = 0
<< ------------ lines deleted ------------- >>
probe I/O subsystem
< ------------ lines deleted ------------- >>
starting drivers
initializing keyboard
Starting secondary CPU 1 at address 400030000
Starting secondary CPU 2 at address 800030000
Starting secondary CPU 3 at address c00030000
initializing GCT/FRU..... at 54c000
Initializing dqa dqb pka pkb pkc pkd pke pkf ega egb egc
AlphaServer Console V6.4-12, built on Mar
P00>>>
1.
Enter the command conn or connect
2.
Connects to partition using your primary CPU.
3.
Check your CPU count here.
4.
Secondary CPUs are started up. Check that all report in.
5.
Prompt appears. Connection complete.
3-10 HP AlphaServer ES80 Upgrades
io7_count = 2
6 2003 at 14:32:06