Setting The Speed - IKA HS/KS 260 control Operating Instructions Manual

Control model
The amount
of time requi-
red for the agi-
tation process
can be adjusted
with aid of the
right turn but-
ton and is
shown on the
right display.
Ist eine Sollzeit
If a target time
(max. 9h 59min)
is set in the right
display or has
been saved from previous agitation
processes, you can activate or terminate the agitation process
with the left turn button while setting the target speed.
You can exit timed mode and interrupt the agitation process by
pressing on the right turn button.
ATTENTION!
not automatically start up in operating mode A or B by
itself. In operating mode C, the devive automatically
starts up by itself.

Setting the speed

Basic model
You can adjusted the speed (HS max. 300 rpm and KS max. 500
rpm) by turning the left turn button. When you do this, you
should note that the agitator does not begin to run until conti-
nuous mode or time mode is active. For the user this means that
it is possible to set a speed in the Off operating mode that will
HS/KS260 0305 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
9 5 9 .
3 4 5
3 4 5
I
/
m i n
PV
Time mode in mode of operation A
3 4 5
3 4 5
I
/
m i n
PV
Continuous mode in mode of operation A
3 4 5
I
/
m i n
PV
Display after power failure
in mode of operation A
After a power failure, the device will
be required for continuous operation or for several agitation pro-
cesses in timed mode.
9 5 9 :
NOTE: After the power has failed, the set time is erased and the
i
n m i n
device switches into Offline operating mode (standstill). The set
PV
speed stays adjusted.
9 5 9 :
Control model
i
The target speed
n m i n
and upper speed
PV
limit (HS max.
300 rpm and
Time mode in mode of operation A
9 5 9 :
KS max. 500 rpm)
i
required for the
n m i n
agitation pro-
PV
cess can be set
with the aid of
Continuous mode in mode of operation A
the left turn
button and are
shown on the
right display.
Continuous
mode is activa-
ted by presing the left turn button.
If a target time is set in the right display in continuous mode or
is saved from previous agitation processes, the agitation process
can be continued in continuous mode by pressing the right turn
button. The agitation process can be terminated by pressing the
left or the right turn button.
ATTENTION!
not automatically start up in operating mode A or B by
itself. In operating mode C, the device automatically
starts up by itself.
3 4 5 9 5 9 .
9 5 9 :
3 4 5
I
/ i
m i n n
PV
3 4 5
9 5 9 :
3 4 5
I
/
i
m i n n
PV
9 5 9 :
3 4 5
I
/ i
m i n n
PV
Display after power failure
in mode of operation A
After a power failure, the device will
m i n
PV
m i n
PV
m i n
PV
27