Using Several Handsets; Registering Handsets; Deregistering Handsets; Locating A Handset ("Paging") - Siemens Gigaset SL785 User Manual

Using several handsets

Using several handsets

Registering handsets

You can register up to six handsets to your
base station.
A Gigaset SL78H handset can be registered
on up to four base stations.
Manually registering the
Gigaset SL78H to the Gigaset
SL785
You must activate manual registration of the
handset on both the handset (1) and the
base station (2).
Once it has been registered, the handset
returns to idle status. The handset's internal
number is shown on the display (e.g., INT 1).
If not, repeat the procedure.
1) On the handset
The handset must not be registered to a
base station.
§Register§
Press the Display key.
The handset is already registered to a base
station:
Ï
¢ ¢
v
Registration
¢

Register Handset

s
Select base station,
(e.g., Base 3) and press
~
Upon prompt, enter the system
PIN for the base station and
§OK§
press
0000.
A message displays indicating that a search
is in progress for a base station ready for
registration.
2) On the base station
Within 60 seconds, press and hold the Reg-
istration/Paging key on the base station
¢
( page 1) (approx. 3 seconds).
44
§OK§
.
. Default system PIN is
Registering other handsets
You can register other Gigaset handsets and
handsets of other devices with GAP (Generic
Access Profile) functionality as follows:
1) On the handset
Start to register the handset as described in
its user guide.
2) On the base station
Press and hold the Registration/Paging key
on the base station (
(approx. 3 sec.).

Deregistering handsets

You can deregister any other registered
handset from any registered Gigaset SL78H
handset.
Ï
¢ ¢
v
Registration
¢

De-register Handset

s
Select the handset you wish to
deregister and press
(The handset you are currently
using is highlighted with <).
~
Enter the current system PIN
and press
§Yes§
Press the Display key.

Locating a handset ("paging")

You can locate your handset using the base
station.
¤
Briefly press the Registration/Paging key
on the base station (
¤
All handsets will ring simultaneously
("paging"), even if the ringers are deacti-
vated.
Ending paging
¤
Briefly press the Registration/Paging key
on the base station or press the End Call
key a on the handset.
¢
page 1)
§OK§
.
§Save§
.
¢
page 1).