Using Bluetooth Devices - Siemens Gigaset SL785 User Manual

Using Bluetooth devices

i à V
INT 1
Á
07:15am
2009
Oct
Room Monitor active
9725551234
OFF Options
Changing the set destination
number
É
¢ ¢
v
Room Monitor
¤
Enter and save number as described in
"Activating the room monitor and enter-
ing the destination number"
¢
( page 47).
Cancel/deactivate room monitor
Press the End Call key a to cancel the call
when the room monitor is activated.
In the idle status, press the Display key
to deactivate the room monitor mode.
Deactivating room monitor calls
remotely
Requirements: The phone must support
touch-tone dialing and the room monitor
should be set for an external destination
number.
¤
Accept a call at the handset acting as the
room monitor and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room monitor
settings (e.g., no ringer) on the handset will
remain activated until you press the Display
§OFF§
on the handset.
key
To reactivate the room monitor function
with the same phone number:
¤
Turn on the activation again and save
¢
§Save§
with ( page 47).
48
Using Bluetooth devices
Your Gigaset SL78H handset can communi-
cate wirelessly with other devices using
Bluetooth™ technology.
Before you can use your Bluetooth devices,
you must first activate Bluetooth and then
register the devices to the handset.
You can register one Bluetooth headset to
the handset. You can also register up to 5
data devices (PC, PDA) to send and receive
directory entries as vCards or exchange data
with the computer (
To use the phone numbers, dialing codes
(country and area code) must be stored in
the directory (
You will find a description of how to operate
your Bluetooth devices in the user guides for
these devices.
Please note
u
On your handset, you can operate
headsets that have the headset or
handsfree profile. If both profiles are
available, the handsfree profile will be
§OFF§
used to communicate.
u
It can take up to 5 seconds to create a
connection between your handset
and a Bluetooth headset. This applies
both when a call is accepted using the
headset or transferred to the headset,
and when a number is dialed from the
headset.
Activating/deactivating Bluetooth
mode
ò
¢
v
§Change§
Press
tooth mode (³ = activated).
In idle status, the ò icon on the handset
shows that Bluetooth mode is activated
¢
( page 2).
¢
page 63).
¢
page 55).
¢
Activation
to activate or deactivate Blue-