Table of Contents
Advertisement
Mount the router on a wood pole
Select a mounting location. You can attach the router to any wood brace.
1.
Attach the pole bracket to the wood brace with two 1/4-inch lag bolts that are at least 3 1/2
2.
inches in length, making sure that the wood brace is level.
Attach the mounting bracket of the router to the pole bracket with two 5/16-inch machine
3.
screws (refer to
— Insert one screw through the hole at the top of the mounting bracket to the hole at the top
— Insert the other screw through the curved slot track in the mounting bracket to the hole in
4.
Level the mounting bracket by rotating the unit along the curved slot tracks. Tighten the
screws.
Place the upright router onto the top of the mounting bracket, as shown in
5.
23. Secure the mounting bracket to the router by attaching two 5/16-inch machine screws
through the holes in the mounting bracket tabs to corresponding holes on the bottom of the
router.
To continue installing the router, see
Tower Mounting
You can mount the router on an outdoor tower.
Note
At the antenna level, the router must be free from metal obstruction within a 4-foot radius
FIGURE 8
Tropos 6410-XA and 6420-XA Installation Guide
Figure 4
for the correct orientation):
of the pole bracket.
the middle of the pole bracket just above the clamp slot.
Tower Mounting
"Connecting Data and Power Cables"
4'
1 1/2'' minimum diameter pipe
Brackets not included
Chapter 2
Figure 5
on page
on page 32.
(Figure
8).
26
Advertisement
Table of Contents
