Table of Contents
Advertisement
Wood Pole Mounting
Figure 6
Note
Antennas must be clear of obstruction.
FIGURE 6
Router
Mount the router on a wood pole
1.
Select a mounting location. You can attach the router to any outdoor wood pole of diameter
at least 1 inch.
Attach the pole bracket to the pole by threading a 1/4-inch bolt through the hole in the lower
2.
clamp slot to the pole. The bolt should be at least 3 1/2 inches in length. Make sure that the
bracket is level.
Attach the mounting bracket of the router to the pole bracket with two 5/16-inch machine
3.
screws (refer to
Tropos 6410-XA and 6420-XA Installation Guide
illustrates proper mounting for an outdoor wood pole.
Wood Pole Mounting
Figure 4
for the correct orientation):
Pole
bracket
Chapter 2
24
Advertisement
Table of Contents
