Table of Contents
Advertisement
Streetlight Mounting
You can mount the router on the horizontal or angled arm of a streetlight.
typical streetlight mounting installation.
FIGURE 9
Router
Mount the router on a streetlight
Select a mounting location. You can attach the router to any streetlight arm with diameter 1"
1.
to 10".
2.
Slip the flat portion of each clamp under the inner slot of the pole bracket.
3.
Use the clamps to attach the pole bracket to the arm, making sure that they are level.
Depending upon the diameter of the arm, you may need to use small clamps, large clamps,
or pairs of large clamps joined together.
Attach the mounting bracket of the router to the pole bracket with two 5/16-inch machine
4.
screws (refer to
— Insert one screw through the hole at the top of the mounting bracket to the hole at the top
— Insert the other screw through the curved slot track in the mounting bracket to the hole in
Level the mounting bracket by rotating the unit along the curved slot tracks. Tighten the
5.
screws.
Tropos 6410-XA and 6420-XA Installation Guide
Streetlight Mounting
Figure 4
for the correct orientation):
of the pole bracket.
the middle of the pole bracket just above the clamp slot.
Pole
bracket
Chapter 2
Figure 9
shows a
28
Advertisement
Table of Contents
