Table of Contents
Advertisement
Hazardous Environment Installation
THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D OR
NON-HAZARDOUS LOCATIONS ONLY.
Warning
Caution
Tropos 6410 and 6420 Installation Guide
EXPLOSION HAZARD. DO NOT DISCONNECT EQUIPMENT UNLESS POWER
HAS BEEN REMOVED OR THE AREA IS KNOWN TO BE NON-HAZARDOUS.
EXPLOSION HAZARD - THE AREA MUST BE KNOWN TO BE NON-
HAZARDOUS BEFORE SERVICING/REPLACING THE UNIT AND BEFORE
INSTALLING.
Outdoor wiring methods shall be installed in accordance with the National Electric Codes
requirements.
Antennas intended for use in Class I, Division 2 Hazardous Locations must be installed
within the end use enclosure. For remote mounting in an unclassified location, routing
and installation of the antennas shall be in accordance with the National Electrical Codes
requirements.
6
Advertisement
Table of Contents
