Table of Contents
Advertisement
Copyright Notice
©2003-2016 ABB All rights reserved. Tropos, Tropos Networks, PWRP, MetroMesh, and GridCom are registered
trademarks of ABB Wireless. All other brand names, company names, product names, trademarks, and registered
trademarks are the property of their respective holder(s). Information contained herein is subject to change without
notice. The only warranties for ABB Wireless products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
ABB Wireless shall not be liable for technical or editorial errors or omissions contained herein.
This product includes technology protected by U.S. Patents 6,704,301; 6,965,575; 7,016,328; 7,031,293; 7,058,021;
7,362,737; 7,376,087; 7,382,778; 7,397,789; 7,450,552; 7,460,489; 7,489,932; 7,499,409; 7,505,426; 7,542,421;
7,551,562; 7,564,781; 7,564,862; 7,580,393, 7,580,705; 7,586,879; 7,649,866; 7,668,137; 7,688,808; 7,689,224;
7,697,504; 7,706,285; 7,720,499; 7,729,278; 7,769,040; 7,843,891; 7,924,749; 7,929,975; 7,957,337; 7,970,394;
7,983,225; 8,031,615; 8,036,130; 8,036,186; 8,054,784; 8,055,759; 8,064,404
Disclaimer for Cybersecurity
The product / software/ firmware/ or the resulting overall solution are designed for data-processing and data
transmission and may therefore be connected to communication networks. It is your sole responsibility to provide and
continuously ensure a secure connection between the product / software/ firmware/ or the resulting overall solution
and your network or any other networks (as the case may be). You shall establish and maintain any appropriate
measures (such as but not limited to the installation of firewalls, application of authentication measures, encryption of
data, installation of anti-virus programs, etc.) to protect the product / software/ firmware/ or the resulting overall
solution, the network, its system and all the interfaces against any kind of security breaches, unauthorized access,
interference, intrusion, leakage and/or theft of data or information. ABB Switzerland Ltd and its affiliates are not
liable for damages and/or losses related to such security breaches, any unauthorized access, interference, intrusion,
leakage and/or theft of data or information.
Although ABB provides functionality testing on the products including related firmware and software that we release,
you should institute your own testing program for any product updates or other major system updates (to include but
not limited to firmware/software changes, configuration file changes, third party software updates or patches,
hardware exchanges, etc.) to ensure that the security measures that you have implemented have not been
compromised and system functionality in your environment is as expected.
FCC Notice to Users and Operators
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own expense. If this equipment does cause
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to correct the interference by using one of the following measures:
Reorient or relocate the receiving antenna.
Increase separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician.
This Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any
changes or modification to said product not expressly approved by Tropos Networks could void the user's authority to
operate this device.
Tropos 6410 and 6420 Installation Guide
2
Advertisement
Table of Contents
