Table of Contents
Advertisement
— Insert one screw through the hole at the top of the mounting bracket to the hole at the top
— Insert the other screw through the curved slot track in the mounting bracket to the hole in
4.
Level the mounting bracket by rotating the unit along the curved slot tracks. Tighten the
screws.
Place the upright router onto the top of the mounting bracket, as shown in
5.
23. Secure the mounting bracket to the router by attaching two 5/16-inch machine screws
through the holes in the mounting bracket tabs to corresponding holes on the bottom of the
router.
To continue installing the router, see
Wood Brace Mounting
You can mount the pole bracket directly on a wood brace without using clamps, as shown in
Figure
7.
FIGURE 7
1/4" lag bolt
3-1/2" minimum
Tropos 6410-XA and 6420-XA Installation Guide
of the pole bracket.
the middle of the pole bracket just above the clamp slot.
Wood Brace Mounting Option
"Connecting Data and Power Cables"
Wood
brace
Chapter 2
Figure 5
on page
on page 32.
25
Advertisement
Table of Contents
