Table of Contents
Advertisement
Remote mount the PS079001 on a metal pole
Use the hose clamp to secure the pole bracket to the pole, as shown in
1.
Secure the PS079001 mounting bracket to the pole bracket. Secure with two each 10-32
2.
screws
Connect the PoE + LAN output cable from the PS079001 LAN output port to the MGT port
3.
on the router.
Attach the PoE input cable to the PoE input port.
4.
Note
When the PS079001 is remotely mounted, the data and power out cable supplied with the unit must be
replaced with an outdoor-rated Ethernet cable of sufficient length.
FIGURE 20
Tropos 6410-XA and 6420-XA Installation Guide
(Figure
20).
Mounting the PS079001 on a Metal Pole
PS079001 mounting
plate
BBU
Data and
AC power
power out
input
(to 6420-XA
Data in
or BB 063001)
Figure 4
Pole bracket
(requires pole mount kit)
Chapter 3
on page 22.
45
Advertisement
Table of Contents
