Chapter 2 Installing the display
The display requires a network and internet connection for downloading software and firmware
updates, and a number of the iQ apps require a network connection as well. You can connect to a
network using Wi-Fi or one of the RJ45 jacks.
SMART Board MX (V3) series
Tip
If you're using one of the display's RJ45 jacks to connect to a network, you can connect a computer to
the other RJ45 jack to provide network access for the computer (pictured). This is particularly useful if
there is only one wired network connection in the room. (Network access is available when Networked
Standby is enabled in Settings but not when Standby is enabled in Settings.
SMART Board MX (V3) series
AM50 iQ appliance
For SMART Board MX series displays
There are three ways to connect the AM50 appliance included with the SBID-MX365, SBID-MX375, and
SBID-MX386 models to a network:
smarttech.com/kb/171555
SMART Board MX
(V2 and V2-C) series
SMART Board MX (V2 and V2-
C) series
SMART Board MX series
SMART Board MX series
28